Carburetor Rebuild Kit For 1989-1998 Harley Davidson FLHTC Electra Glide Classic
Overview of All Balls Carburetor Rebuild Kit. NBR rubber material is used on all O-rings and rubber gaskets; NBR has excellent resistance to the ethanol used in today's fuels. Components included in the kits are based off of U. Models and discretion must be used when attempting to install the kit on a non-US model. All gaskets and O-rings including intake gaskets before and after the carburetor. Kits include float bowl, carburetor cap, and accelerator pump screws. Extended fuel mixture screw with spring, washer, and O-ring. Float needle valve with FMK tip. Accelerator pump diaphragm spring and boot. Emulsion tube with slide needle. Three main jets and three pilot jets that can be used to tune a stock machine or a modified one.
Kits are intended for closed-course racing only. (3) 4mm-0.70 x 18mm Pan head bolts with flat washer and split lock washer. (4) 4mm-0.70 x 14mm Pan head bolts. (3) 4mm-0.70 x 10mm Pan head bolts. (4) 4mm-0.70 x 4mm Flange pan head shouldered bolts.
The Air Resources Board (ARB) does not permit the use of aftermarket emission-related parts that alter the air/fuel ratio of an emission-controlled vehicle. The item "Carburetor Rebuild Kit For 1989-1998 Harley Davidson FLHTC Electra Glide Classic" is in sale since Wednesday, January 23, 2019. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Air Intake & Fuel Delivery\Carburetors & Parts". The seller is "rt25powersport" and is located in Monroe, Connecticut. This item can be shipped worldwide.
- Brand: All Balls
- Manufacturer Part Number: 26-1760
- Warranty: No Warranty
- California Prop 65 Warning: California Proposition 65 Warning: Cancer and Reproductive Harm